Water Hardness Testing Kits

test kits

IT IS IMPORTANT TO ASCERTAIN WHAT THE PROBLEMS ARE WITH WATER HARDNESS.
THIS INFORMATION WILL ENABLE YOU TO SELECT THE CORRECT PRODUCT.

Tell tale signs...
If you live in a hard water area, 60% of the UK does, you will know the tell tale signs ~ furring of appliances, scale deposits in a heating system, noisy radiators and reduced flow and efficiency.

It is important to know the level of water hardness and putting the correct solution in place can save money.

Follow these simple instructions, to use the droplet test, the water hardness can then be accurately measured.

	CalTest can take the guess work out of diagnosing water hardness. It’s easy to use with results in seconds.
	ppm - relates to parts per million of hardness in the water. Any reading above 100ppm will result in a water hardness problem.

EASY TO FOLLOW INSTRUCTIONS...

All you have to do is remove the Water Hardness Reagent bottle from the test tube and fill the test tube from the cold water tap up to the 10mm mark.
Remove the Water Hardness Reagent lid. Squeezing the bottle gently, add one drop at a time and mix between drops until the colour changes from red to blue.
Be sure to count the drops, then multiply by 20 to give your water hardness reading.

0-5 DROPS/0-100ppm = NO ACTION RECOMMENDED
5-15 DROPS/100-300ppm = CALMAG SCALE INHIBITOR RECOMMENDED

Water service testing kits

Calmag Coliform Test

This test enables the simultaneous detection, identification and confirmation of total coliforms and E.coli in 24 hours or less.

The examination of water for microbial pollution is a major health undertaking. Drinking water supplies, swimming pools and spas are all regularly monitored for the indicator organism (E.coli).

Calmag CT010 Most Probable Number

Pack contains 50 x 10ml pre-dispensed tubes complete in racks ready for use.

Calmag CT100 Presence/Absence Pack

Packs contain 12 mix and dispense unit doses of reagent for use with 100ml sample.

Calmag Pocket Kits

An inexpensive range of simple to use test kits for individual test parameters.

These kits provide a quick check method for the most commonly carried out water tests, which are all based on a tablet reagent and use a variety of test procedures to colour match using a test card.

Test Kit Type	Range (mg/l)
Aluminium	0 - 0.5
Ammonia	0 - 2.0
Calcium hardness	0 - 500
Chlorine- DPD	0 - 2.0
Copper	0 - 5.0
Nitrate	0 - 75
PH values	4 - 10
Phosphate	0 - 100
Sulphate	0 - 200
Total Alkalinity	0 - 500
Zinc	0 - 2.0

Calmag Fouling Kit
For regular checks on capacity in ion exchange resins.

TDS Meters
Available to test TDS levels, especially used on RO units.

Calmag Chlorination kit
The disinfection of water services is essential for the control of Legionnaire’s disease and other forms of waterborne infection. Disinfection must be carried out before the system is brought into service and periodically thereafter, so as to keep the system in a safe condition.

WT400 provides a simple and convenient way of chlorinating and disinfecting hot and cold water services.

Kit includes:

Chlorocol tablets (50 tablets)
2 x square test tubes
10 x disposable gloves
Instachlor PR-1000 (100 tablets)

Calmag Dipslide kit
These slides provide a simple means of eliminating these micro-organisms in industrial and environmental applications.

TT C/M dipslides are a combination slide for the detection of bacteria, yeasts and moulds in fluids and on surfaces.

Kit range includes:

Dipslides TTC/M (pack of 10)
Dipslides TTC (total bacteria)
Disposable gloves

<< Back