Calmag Ltd









links
club calmag

Grants Available
Grants of up to £800 may be available from all councils in Scotland to improve your water supply
Click here for further information

Unit 3-6 Crown Works, Bradford Road, Sandbeds, Keighley, West Yorkshire,
BD20 5LN

Phone: 01535 210320
Fax: 01535 210321
Email: sales@calmagltd.com


CalFresh is a filter system that is designed to supply quality drinking water and comes with its own separate drinking water touch tap. Water from the mains supply is connected to the inlet port of the unit and directed down through the filter cartridge. This removes unwanted contaminants. Filtered water then flows up through the centre of the cartridge and through the outlet where it is delivered through the separate drinking water touch tap.

CalFresh comes with two choices of cartridge. The first is an activated carbon and resin filter, the Fresh CR. This will remove bad taste, chlorine, odour, organic materials, limescale, scum and heavy metals. The Fresh CR is often recommended to protect kettles from hard limescale build up.  The second is an activated carbon block filter, the Fresh C. This will remove the same contaminants as the Fresh CR and will also remove sediment, dirt, discolouration, bacteria and cysts. However it will not remove limescale and scum.

CalFresh comes with a lifetime guarantee. This does not cover the filter cartridge which needs to be replaced at least twice annually depending on your water quality. For more details please click here.

For more information on CalFresh, including comparisons to competitors products please click here.

Specification..

Housing height:
Housing diameter:
Tap height:
Tap reach:
Filter cartridge replacement:
Colour/material:
Maximum working pressure:
Minimum working pressure:
Tested to:
Maximum temperature:
Maximum flow rate:
Inlet & outlet:
300mm
75mm
200mm
75mm
Fresh C (carbon
block) or Fresh CR (carbon/resin) both 10"x2.5"Ø
White manifold head with white bowl. Chrome tap
8 Bar (112psi)
1 Bar
12 Bar (168psi)
30°C
10 L/Min
3/4" BSP (female thread)



<< Back